Listed below are our Standard Inventory Items. We work hard to keep these species/profiles in stock at all times! There are other profiles that may be available, please call us for more information on those. Click the button on the right to view the available profiles/species in a printable chart.

1x6

This profile is the standard for 12″, 16″ and up to 24″ Joist Spacing!

1×6 can be ordered with Side Grooves (for Clip Fastening) or Bottom Grooves (to accommodate for restricted air-flow below)

5.4x6

This profile can be used on all standard joist spacing!

5/4×6 can be ordered with Side Grooves (for Clip Fastening) or Bottom Grooves (to accommodate for restricted air-flow below)

1x4

Available in:

Ipe

This profile is commonly used for decking, fencing, privacy screens, and much more! 12″ and 16″ Joist Spacing is just fine for this profile, as decking.

1×4 can be ordered with Side Grooves (for Clip Fastening).

5.4x4

Available in:

Ipe

This profile is commonly used for decking, fencing, privacy screens and much more! 12″, 16″, 20″ or 24″ Joist Spacing is just fine for this profile, as decking.

This profile is also used when the area underneath the deck has restricted air-flow. In some cases, this profile may be less susceptible to cupping than the 1×6 or the 1×4.

1×4 can be ordered with Side Grooves (for Clip Fastening).

3.5 TandG

Available in:

Ipe

Cumaru

A very versatile profile used for Porch Decking, Siding, Ceilings, Privacy Screens, and much more! One notable feature of this product is that the joints do NOT need to land on a joist. The T&G nature allows joints to fall anywhere! Even between joists! This reduces waste, considerably.

You can also request a 3″ V-Groove T&G. That is a popular product for ceilings!

5 TandG

Again, a very versatile profile but, most commonly used as Porch Decking and Ceilings. One notable feature of this product is that the joints do NOT need to land on a joist. The T&G nature allows joints to fall anywhere! Even between joists! This reduces waste, considerably.

This can also be ordered in a V-Groove T&G. This is our most popular product for ceilings, by far!

1x8

Available in:

Ipe

While this profile can be used as decking (including grooved boards, for clip fastening) but it is most commonly used for Stair Risers. It has also been used for fence designs and pergolas.

1×8 can be ordered with Side Grooves (for Clip Fastening) or Bottom Grooves (to accommodate for airflow restricted circumstances).

1x12

Available in:

Ipe

This profile is most often used as skirting/facia. It comes in very handy for covering those unsightly pressure-treated joists and band boards. Remember to score the back of the boards with grooves, if you are installing this directly to a flat surface (like facia). It is recommended to set the facia off the joists, by utilizing furring strips. This will allow air to flow on all sides of the board, preventing cupping. This profile is the most susceptible to cupping so, ask your salesperson questions, if you are unsure!

The following are ONLY available in Ipe.

2x2 1
2x4 1
2x6 1
4x4 1

Available In: Ipe, Cumaru, Tigerwood, Garapa, and Balau

5.4x6 MHR

Available Only in Ipe

2x4 MHR
Rainscreen siding

RainScreen Siding is perfect for exterior or interior wall cladding. This ship-lap(like) design offers the appearance of a standard ship-lap without any pesky fasteners showing! The groove on the bottom allows the boards to sit nicely on our proprietary H-Clip Hidden Siding Fasteners.

DeckTiles Resized For Decking Page

Available in:

Ipe

Cumaru

Red Balau

Ipe Deck Tiles are the ideal solution for rooftop, patio and deck top transformation into an enjoyable hardwood deck. They are easy to install, beautiful, durable, cost-effective, and easy to maintain.

Perfect for ANY coverage that has little or no airflow! That would include rooftop decks, ground-level decks, on concrete pads, etc…